home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1997 July / EnigmA AMIGA RUN 20 (1997)(G.R. Edizioni)(IT)[!][issue 1997-07 & 08][EAR-CD IV].iso / lightwave / tips / lightwave-jan95.txt / 000117_owner-lightwave-l _Sat Jan 14 07:36:42 1995.msg < prev    next >
Internet Message Format  |  1995-02-04  |  2KB

  1. Return-Path: <owner-lightwave-l>
  2. Received: by netcom15.netcom.com (8.6.9/Netcom)
  3.     id GAA01538; Sat, 14 Jan 1995 06:06:40 -0800
  4. Received: from clark.net by netcom15.netcom.com (8.6.9/Netcom)
  5.     id GAA01530; Sat, 14 Jan 1995 06:06:36 -0800
  6. Received: (jamesb@localhost) by clark.net (8.6.9/8.6.5) id JAA00854; Sat, 14 Jan 1995 09:07:18 -0500
  7. Date: Sat, 14 Jan 1995 09:07:18 -0500 (EST)
  8. From: James Brooks <jamesb@clark.net>
  9. To: Lightwave Mailing List <lightwave-l@netcom.com>
  10. Subject: surfaces loading?
  11. Message-ID: <Pine.SOL.3.91.950114085632.29511B-100000@explorer>
  12. MIME-Version: 1.0
  13. Content-Type: TEXT/PLAIN; charset=US-ASCII
  14. Sender: owner-lightwave-l@netcom.com
  15. Precedence: bulk
  16.  
  17.  
  18. Using LW 3.5.
  19.  
  20. Situation:  I just received my Warp Engine 2 weeks ago and decide to 
  21. switch my VT drive from the A2091 controller to the Warp Engine's controller.
  22.  
  23.  
  24. Problem: For some reason I were not able to load some of the surfaces 
  25. that came with VT/LW!  Or so the program says after my VT drive claims to 
  26. have a read error at THE SAME BLOCK on all the 'bad' surfaces.  LW comes 
  27. back and says that it was not able ot load the surfaces BUT the 
  28. attributes change like they supose to!  So I thought, what about saving 
  29. them.  I did that and now I can load the surfaces with no problem!
  30. Anyone out there ever experienced anything like this or similar?
  31.  
  32. I have checked the HD with AmiTools, QuarterBack Tools Deluxe and EVEN 
  33. low-level formated the HD to hope to mark out this 'bad block'.
  34. I have never had any problems in the past in loading THOSE surfaces.
  35.  
  36. At least everything is working fine now! :-)
  37.  
  38. *************  THESE ARE THE SURFACES THAT I COULD NOT LOAD BEFORE I SAVE
  39. *************   THEM AGAIN. ***********************************
  40.  
  41. Surfaces: BrushedMetal, Copper, Gold, RipplingGold and Silver.
  42.  
  43. ****************************************************************
  44.  
  45. Alex
  46.  
  47. ---------------------------------------------------------------
  48. James "Alex" Brooks              Amiga 4000/040/28MHz 20MB RAM
  49. Lightwave 3.5 / Imagine 3.0      VideoToaster 4000 3.1
  50. Sysquest 3.5" 270MB         Bernoulli 90Pro
  51. NEC 3xp Triple Speed CDROM       Warp Engine 4028
  52. Interchange 3.0                  Dynamic Motion Module 1.06
  53. Epson ES-600C Scanner            E-Mail: jamesb@clark.net
  54. ---------------------------------------------------------------
  55. ** World Construction Set AND VideoToaster 4.0 coming soon! ***
  56. ---------------------------------------------------------------